Specs
Z246Art no: 967 27 15‑01 | |
|---|---|
| Capacity | Z246 Art no: 967 27 15‑01 |
| Productivity | 2.4 acres/hr |
| Speed forward max | 6.5 mph |
| Speed forward min | 0 mph |
| Cutting deck | |
| Cutting width | 46 in |
| Cutting deck type | Stamped, Reinforced |
| Cutting methods | Collect/Mulch/Side discharge |
| Cutting deck material | Steel |
| Deck thickness | 13 gauge |
| Cutting height steps | 6 |
| Blade engagement | Electric clutch |
| Clutch rating | 105 ft.lb |
| Blades | 2 pcs |
| Blade-tip speed | 16,600 fpm |
| Anti-scalp wheels | 3 |
| Nose roller | No |
| Deck lifting system | Manual, hand operated |
| Powder-coated cutting deck | Yes |
| Spindle/mandrel type | Aluminium, vented |
| Greasable mandrels | Yes |
| Deck Wash Port | Yes |
| Cutting height, min (approximate) | 1.5 in |
| Cutting height, max (approximate) | 4 in |
| Dimensions | |
| Base machine, length | 75 in |
| Base machine, height | 40 in |
| Base machine, width (chute down) | 56.5 in |
| Base machine, width (chute up) | 48 in |
| Weight | 504 lbs |
| Drive system | |
| Transmission type | Hydrostatic |
| Transmission manufacturer | Hydro-Gear |
| Pump displacement | 10 cm³ |
| Fan-cooled pumps | Yes |
| Engine | |
| Motor/engine manufacturer | Briggs & Stratton |
| Engine name | Endurance Series V-Twin |
| Power output | 20 hp |
| Cylinder displacement | 49.43 cu.inch |
| Cylinders | 2 |
| Engine cooling | Air |
| Air filter type | Auto-type Paper |
| Power/fuel type | Gasoline |
| Engine lubrication type | Full pressure with oil filter |
| Oil filter | Yes |
| Fuel tank volume (with reserve) | 3.5 gal (US) |
| Fuel tank location | Side (Single) |
| Equipment | |
| Seat material | Vinyl |
| Seat spring | Yes |
| Seat back height | High |
| Hour meter type | Digital with pre-programmed service intervals |
| Cup holder | Yes |
| Hinged armrests | Optional |
| Seat type | 15" high back |
