Toro GrandStand® 36″ (91 cm) 15 HP 603cc (74534) (79534 CARB)

Contact us for price

Stock status: Call Store for Availability

  • Exceptional visibility from the GrandStand protects the operator, the mower and the property. The operator is better able to steer clear of obstacles, and easily pass beneath branches.
  • Toro’s foldable operator platform instantly converts the GrandStand to a walk-behind. It easily lowers back down when its time to ride – saving time, money and trailer space by eliminating the need to switch mowers.
  • Conserves space to get more machines on your trailer, or allows for a smaller trailer and lighter load.
  • With hefty cast iron spindles including maintenance free bearings plus only annual grease points, there will be less need for routine maintenance. That means less time spent off your mower and more time generating profits with it.
Call Us Now

Specs

  • Engine
    15 HP* (11 kw) Kawasaki® FS541V 603cc
  • Fuel Capacity
    Gasoline – 7.8 gallons (29.5 L)
  • Cutting Width
    36″ (91.4 cm)
  • Blade Tip Speed
    18,500+ ft/min (5,640 m/min)
  • Blade Type
    .25″ (.6 cm) heat-treated steel
  • Carrier Frame
    3″ x 1.5″ x 12 gauge (7.6 cm x 3.8 cm x 12 gauge)
  • Caster Tires
    11″ x 4″ – 5″ (28 cm x 10.2 cm – 12.7 cm) flat-free semi-pneumatic
  • Clutch
    Electromagnetic
  • Controls
    Twin lever
  • Deck Design
    7-gauge 36″ (91 cm) TURBO FORCE® with bull-nose bumper
  • Discharge Chute
    Rubber
  • Drive System
    Pumps (10cc/rev) & Wheel Motors (10 cir)
  • Drive Tires
    18″ x 8.5″ – 8″ (46 cm x 22 cm – 20 cm)
  • Engine Displacement
    603cc
  • Ground Speed
    8.0 mph forward (12.9 km/h)
  • Height of Cut
    1″ – 5″ in 1/4″ (2.5 cm – 12.7 cm in 6 mm) increments
  • Hour Meter
    Standard
  • Hydraulic Fluid
    Premium synthetic
  • Comfort Platform
    Foldable Operator Platform with Suspension
  • Spindle Bearings
    Maintenance-free
  • Spindle Housing
    9 3/8″ (23.8 cm) diameter cast iron
  • Weight
    833 lbs. (377.8 kg)
  • Disclaimer
    * The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAEJ2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.